5 Whys template & guide | Root Cause Analysis | Conceptboard (2024)

Templates

5 Whys template & guide | Root Cause Analysis | Conceptboard (1)

Use free template now

This post is also available in: German

The 5 Whys template is a simple, yet powerful tool used for root cause analysis. Based on the technique developed by Sakichi Toyoda, it takes an iterative approach to problem-solving. Starting with an initial problem statement, a question beginning with ‘why’ is asked 5 times in order to zero in on the root cause.

Along with the Fishbone Diagram, the 5 Whys template is a seminal technique for problem-solving through a deeper understanding of causal relationships. Let us understand this method in a little more detail. Or directly use the template.

What is the 5 Whys root cause analysis?

The 5 Whys problem-solving method was originally developed for Toyota Motor Corporation’s production facility. The technique starts with a single problem and asks a ‘why’ question based on the answer to the previous question.

The iterative process of asking ‘why’ ensures that each step is logically connected to the previous by a cause and effect relationship. Each ‘why’ takes you one step closer to finding the root cause.

5 Whys analysis in six sigma

Six sigma is all about waste reduction, process optimization and quality improvements. The simplicity of the 5 Whys method lends itself well to the analysis stage of six sigmas. Since the technique eschews complex statistical methods, individuals from across functions and departments can participate in the process. It’s a great technique for driving process improvements and ensuring past mistakes do not reoccur.

How to use the 5 Whys template

Since a 5 Whys session is in essence a brainstorming session, it is important to work with a whiteboard and sticky notes. Mapping out the process on an online whiteboard helps people better visualize what happened. Multiple stakeholders can work on Conceptboard’s collaborative template in real time and add their ideas on digital sticky notes. The template is completely editable.

5 Whys template & guide | Root Cause Analysis | Conceptboard (2)

Try it now

Steps to using the 5 whys template

  1. Asking the right question – Before you embark on a 5 whys analysis, it is important to start with the right question. Here, a problem statement template can come in handy.
  2. Gather the right people – All key stakeholders and especially decision makers should be involved in the session.
  3. Assign a moderator– It is important for the moderator to drive the conversation, ensure each of the steps are followed and assumptions avoided
  4. Prepare the board in advance – Load the template by clicking the ‘+’ button and choosing ‘Insert template’. Drag and drop the 5 Whys template and share the board with the team.
  5. Add sticky notes and write down your comments for each round of the process.
  6. Once the analysis is complete, identify the action points and export the board as a PDF or print it out.

5 Whys Example

Here’s an example of the 5 Whys process and the solutions that came up from the analysis.

  1. Why was the hospital’s new health care app delayed by 4 weeks?
    Answer: Additional complexities were revealed in the testing phase.
  2. Why did additional difficulties come up?
    Answer: The creation phase did not include a solution for a major use case.
  3. Why did the creation phase miss a major use case?
    Answer: The original brainstorming sessions did not include employees from the department.
  4. Why were key employees missing from the brainstorming sessions?
    Answer: The brainstorming session was led by a particular department. In this case, additional departments were brought in later in the development process.
  5. Why is this process managed by a particular department?
    Answer: This is how it’s always been done.

Solutions found:

Create a new process that builds on the strengths of all departments and encourages interdepartmental collaboration. Ensure key employees from every department are present in all brainstorming sessions throughout all phases.

If you’ve like this template, we’ve also rounded up 15 of our favourite brainstorming techniques and templates that help you generate new ideas and drive innovation. For additional problem-solving templates, you can use our A3 problem-solving template. Also check out our list of retrospective ideas and templates you can use today with your team.

5 Why's

Use the free template with your team & customize as you go!

Use Template

Linda

Linda is Content Marketing Manager at Conceptboard and crazy about birds, geography and music from the last decades. When she's not regretting being born in the wrong decade, she illustrates cards or spends ages in her favorite bookshop.

More interesting articles for you

Guides, Templates

OZG 2.0: The future of digital administration in Germany is FIM

Since its introduction in 2017, the Online Access Act (OZG) has aimed to make it easier for citizens and companies to access administrative services and make them available digitally.

Read article

Templates

Unwrap the Joy: Elevate Your Team’s Holiday Spirit with Our Exclusive Christmas Game Template!

The holiday season is upon us, and at Conceptboard, we’re thrilled to unwrap the gift of festive cheer with our special Christmas Game Template!

Read article

Templates

Wireframe Template – A structure to build something great | Free Template

By using Wireframe Templates, you can streamline your workflow and ensure a more efficient and effective design process.

Read article

Problem Solving using the 5 Whys

2 Comments. Leave new

  • Dr Gurnam Singh Sagoo

    20 May 2022 08:47

    I disagree with your statement “Six sigma is all about waste reduction, process optimization and quality improvements.”

    Six-Sigma is all about “variation reduction” using statistical tools and techniques and pioneered by Motorola.

    Lean is all about “Waste reduction” using Lean tools and techniques as part of Lean Manufacturing/the Toyota Production System developed by Toyota.

    Reply
  • Stephen Downes-Martin (www.downesmart.com)

    5 July 2022 17:26

    (1) The example solution is not a solution, it is the recognition that something new needs to happen, followed by requirements on how that is to be achieved.

    (2) A single thread down (one answer per question) is insufficient for most difficult problems (i.e. ones that require a 5-why’s!) Each question will generate several answers, each of which is drilled down on. Then answers to different questions that are the same are linked into a lattice. If you are lucky it all comes together into a single item at the bottom of the diagram. One ends up with several dominant threads from top to leaf nodes, each of which has to be dealt with.

    (3) The 5-why’s identifies several possibly independent causes. These must be dealt with using a problem solving method — which 5-why’s is not. It is a problem identification method.

    Reply

Leave a Reply

Experience the power of visual collaboration

Experience how Conceptboard boosts your team’s
hybrid collaboration and communication.

Contact Sales

Try for free

No credit card

No commitments

Start right now

5 Whys template & guide | Root Cause Analysis | Conceptboard (2024)

FAQs

How to answer 5 Why analysis? ›

Start with a problem and ask why it is occurring. Make sure that your answer is grounded in fact, and then ask the question again. Continue the process until you reach the root cause of the problem, and you can identify a counter-measure that will prevent it from recurring.

What is the 5 Whys analysis template? ›

A 5 Whys template is a powerful tool that can be used to identify the root cause of an issue. It is a structured approach that provides a systematic method to address problems, ensuring that no aspect is overlooked.

What are the 5 Whys questions? ›

The 5 Whys Problem Solving technique is a simple process to follow to solve any problem by repeatedly asking the question “Why” (five times is a good rule of thumb), to peel away the layers of symptoms that can lead to the root cause of a problem. This strategy relates to the principle of systematic problem solving.

What are the 5 Whys of root cause analysis? ›

The 5 Whys method is a powerful and straightforward approach to root cause analysis used in various industries worldwide. It focuses on asking why a problem happened and then repeating “Why?” four more times until you find the main cause. Imagine you're running late because your car won't start.

What is the first thing you must do before starting the 5 Why analysis? ›

You start with a statement of the situation and ask why it occurred. You then turn the answer to the first question into a second Why question. The next answer becomes the third Why question and so on. By refusing to be satisfied with each answer you increase the odds of finding the underlying root cause of the event.

What is the 5 why checklist? ›

The 5-Whys is a simple brainstorming tool that can help teams identify the root cause(s) of a problem. Once a general problem has been recognized (either using the Fishbone Diagram or Process Mapping), ask “why” questions to drill down to the root causes.

How to root cause analysis template? ›

How to get started with the root cause analysis template
  1. Complete the overview. Before starting a root cause analysis, fill out your team's details in the template's overview section. ...
  2. Create a problem statement. ...
  3. Discuss the problem's causes. ...
  4. Establish a final problem statement. ...
  5. Propose solutions. ...
  6. Update as work is completed.

What is The 5 Whys diagram? ›

The 5 Whys and fishbone diagrams can be used on their own or as a follow-up to techniques like the “last 10 patients” chart audit or fall-out analysis. The 5 Whys involves asking and answering the question "Why?" five times or as many times as it takes to get to the "root cause" or end of the causal chain.

What are the 5 Y's examples? ›

Five Whys Example
ProblemThere is a puddle of water on the floor.
Why?The overhead pipe is leaking.
Why?There is too much water pressure in the pipe.
Why?There is a faulty control valve.
Why?Control valves have not been tested.
2 more rows

What is the 5 whys argument? ›

The technique was originally developed by Sakichi Toyoda who stated that "by repeating why five times, the nature of the problem as well as its solution becomes clear." The five whys are used for drilling down into a problem and the five hows are used to develop the details of a solution to a problem.

How to fill 5 why analysis? ›

How to use the 5 whys
  1. Gather your team. ...
  2. Define the issue. ...
  3. Ask “Why?” ...
  4. Ask “Why?” four more times. ...
  5. Stop at a good solution. ...
  6. Fix the root cause of the problem. ...
  7. See how it works!

What is the 5 whys solution? ›

The 5 Why method is simply asking the question “Why” enough times until you get past all the symptoms of a problem and down to the root cause. The 5 Why method is often used during the Analyze phase of the DMAIC process and the Plan phase of PDCA activities.

What is the best root cause analysis example? ›

If we're sick and throwing up at work, we'll go to a doctor and ask them to find the root cause of our sickness. If our car stops working, we'll ask a mechanic to find the root cause of the problem. If our business is underperforming (or overperforming) in a certain area, we'll try to find out why.

What is 5 why in data analysis? ›

Five whys (5 whys) is a problem-solving method that explores the underlying cause-and-effect of particular problems. The primary goal is to determine the root cause of a defect or a problem by successively asking the question “Why?”.

What are the 5 steps of root cause analysis? ›

To go through the RCA process effectively, follow the five steps below:
  • Define the Problem. Analyze what you see happening and identify the precise symptoms to form a problem statement.
  • Gather Data. ...
  • Identify Causal Factors. ...
  • Determine the Root Cause(s) ...
  • Recommend and Implement Solutions.
Aug 12, 2022

What is an example of 5 Whys in healthcare? ›

Example: 5 Whys

1) Why did the patient receive the wrong medication? The nurse did not complete patient identification. 2) Why did the nurse not complete patient identification? The patient did not have a wristband.

How to fill out a 3 legged 5 why? ›

3×5 Why Analysis Step-by-Step
  1. Specific leg – Why did this situation occur? Repeat five times, ensuring that each why points back to the previous answer.
  2. Detection leg – Why was this situation overlooked? ...
  3. Systemic leg – Why did the systems in place permit the error to occur?
Nov 8, 2020

Top Articles
Latest Posts
Article information

Author: Prof. An Powlowski

Last Updated:

Views: 6153

Rating: 4.3 / 5 (64 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Prof. An Powlowski

Birthday: 1992-09-29

Address: Apt. 994 8891 Orval Hill, Brittnyburgh, AZ 41023-0398

Phone: +26417467956738

Job: District Marketing Strategist

Hobby: Embroidery, Bodybuilding, Motor sports, Amateur radio, Wood carving, Whittling, Air sports

Introduction: My name is Prof. An Powlowski, I am a charming, helpful, attractive, good, graceful, thoughtful, vast person who loves writing and wants to share my knowledge and understanding with you.